Resetting The Csacs 1120 Database Password; Reconfiguring The Csacs 1120 Ip Address - Cisco 1120 Installation Manual

Reconfiguring CSACS 1120 System Parameters

Resetting the CSACS 1120 Database Password

You should change the ACS database password from time to time, to ensure database security. This
procedure details how to reset the password after you have logged on with the existing credentials.
To reset the ACS database password:
Log in to the CSACS 1120. For more information, see
Step 1
Console.
At the system prompt, enter
Step 2
At the
Step 3
password, and press Enter.
At the
Step 4
and press Enter.
Note
At the
Step 5
Result: The console displays:
Password is set successfully.

Reconfiguring the CSACS 1120 IP Address

Typically, you configure the IP address only once, during initial configuration. See
1120.
Caution Reconfiguring the IP address may cause other network devices to fail to recognize the CSACS 1120.
Reconfiguring the IP address causes services to restart. AAA services to users will be interrupted.
Caution
To set or change the IP address of your CSACS 1120, the CSACS 1120 must be connected to a working
Note
Ethernet connection.
To reconfigure the IP address:
Step 1 Log in to the CSACS 1120. For more information, see
Console.
At the system prompt, enter
Step 2
Installation Guide for the Cisco 1120 Secure Access Control Server 4.2
4-20
set dbpassword
Please enter the OLD ACS Database Encryption Password:
Please enter the NEW ACS Database Encryption Password:
The new password must not contain the administrator account name, must contain a minimum
of six characters, and it must include a mix of at least three character types: numerals, special
characters, uppercase letters, and lowercase letters. Each of the following examples is
acceptable: 1PaSsWoRd, *password44, Pass*word.
prompt, enter the new password again, and press Enter.
Reenter new password:
set ip
Chapter 4 Administering the Cisco 1120 Secure Access Control Server
Logging In to the CSACS 1120 from a Serial
, and press Enter.
Logging In to the CSACS 1120 from a Serial
, and press Enter.
prompt, enter the old database
prompt, enter the new password,
Configuring CSACS
OL-19455-01