Cisco 1120 Installation Manual page 108

Upgrade Procedure
Step 6 Download and apply the ACS Software Upgrade package.
Go to the /Upgrade package software for appliance ACS 4.1 folder on the upgrade CD.
a.
Double-click the autorun.bat icon.
b.
The download utility starts. You are prompted to enter the hostname or IP address of the appliance,
as shown in
Enter the hostname or the IP address of the distribution server and click Install.
c.
The ACS web interface starts.
Log in to the web interface.
d.
Choose System Configuration > Appliance Upgrade Status.
e.
The Appliance Upgrade page opens, as shown in
Download and install the software upgrade.
f.
The steps for downloading and installing the software upgrade package are the same as the steps for
installing the management software as described in
Note
Back up the upgraded ACS SE data and configuration.
Step 7
To upgrade the ACS SE appliance to the latest Microsoft hotfixes, you must re-image the ACS SE device.
Because reimaging destroys all of the existing data on the device, you must first back up your existing
data and then restore it by using one of the following features:
ACS Backup, which is available in the System Configuration section of the web interface. For more
•
information, see the latest version of the User Guide for Cisco Secure ACS 4.2.
The CLI backup command, which you enter from the serial console. For more information, see
•
Backing Up ACS Data from the Serial
Use this backup to restore the data after you recover the ACS SE 4.1 base image.
Note
Use the Recovery DVD for your CSACS 1120 hardware version. If your CSACS 1120 is a:
Step 8
Perform an initial configuration of the CSACS 1120. For more information, see
Step 9
1120.
Installation Guide for the Cisco 1120 Secure Access Control Server 4.2
5-10
Figure 5-1.
If you complete the upgrade and the ACS console displays the message
, this indicates that the upgrade progress is hanging.
progress
If this condition occurs, start an ACS console session and enter the command
, where
[ hostAddress ] hostAddress
console from the upgrade process.
Chapter 5 Upgrading and Migrating to Cisco 1120 Secure Access Control Server
Figure 5-2.
Step 5.
can be any IP address. This action releases the ACS
Console.
Appliance upgrade in
download
Configuring CSACS
OL-19455-01