Cisco 1120 Installation Manual page 22

Product Overview
•
•
Note
Product Serial Number Location
The serial number label is located on the front-panel of the CSACS 1120 Series appliance, at the lower
Left.
Figure 1-3
The serial number for the CSACS 1120 Series appliance is 11 characters long.
Note
Cisco Product Identification Tool
The Cisco Product Identification (CPI) tool helps you retrieve the serial number of your Cisco products.
Before you submit a request for service online or by phone, use the CPI tool to locate your product serial
number. You can access this tool from the Cisco Support website.
To access this tool:
Click the Get Tools & Resources link.
Step 1
Click the All Tools (A-Z) tab.
Step 2
Select Cisco Product Identification Tool from the alphabetical drop-down list.
Step 3
This tool offers three search options:
•
Installation Guide for the Cisco 1120 Secure Access Control Server 4.2
1-4
Four green, front-panel appliance LEDs:
Power (indicates whether the power supply is operational).
–
Hard disk drive activity (indicates whether the drive is functioning properly).
–
Network Interface connector (NIC) 1 and NIC 2 activity (indicates whether interrupts or packet
–
transfers are running).
For a description of the LEDs, see
The CSACS 1120 appliance is normally shipped with a rack-mount hardware kit which includes
either brackets or rails that allow the CSACS 1120 to be positioned in a 4-post equipment rack. For
more information, see Chapter 3, "Installing the Cisco 1120 Secure Access Control System
Hardware."
The rack-mount hardware kit does not include a 2-post equipment rack.
Figure 1-3 shows the location of this label.
CSACS 1120 Appliance Serial Number Location
XXXXNNNNNNN
Search by product ID or model name.
Chapter 1 Cisco 1120 Secure Access Control Server Overview
CSACS 1120 Appliance Front-Panel View, page 1-5.
CSACS1120
OL-19455-01