Appendix C
Command Reference
restart
To restart one or more of the ACS services, use the restart command:
restart [ service name(s) ]
AAA services are temporarily halted while this command executes.
Note
Syntax Description
This command uses as an argument the name of the service or services to be restarted.
Usage Guidelines
Use the restart command to stop and restart any of the ACS services. You can determine the status of
each service by using the show command. For more information, see
Serial
Example
The following command syntax restarts the CSAuth and CSAdmin services:
restart csauth csadmin
restore
To restore ACS data from an FTP server, use the restore command:
restore [ server ] [ username ] [ filepath ] [ filename ]
Syntax Description
Argument
server
username
filepath
filename
Usage Guidelines
If you do not enter the parameters, the system prompts you for the information. Also, you will be
prompted to enter a decrypt password, to restore the user or group database, and the ACS
system configuration.
OL-19455-01
Console.
Description
Hostname for the FTP server from which the file
will be sent.
User account name used to authenticate the
FTP session.
Location under the FTP server root in which the
restore file is located.
Name of the restore file to be used.
Installation Guide for the Cisco 1120 Secure Access Control Server 4.2
Commands
Restarting ACS Services from a
C-9