Cisco 1120 Installation Manual page 105

Chapter 5 Upgrading and Migrating to Cisco 1120 Secure Access Control Server
Note
Warning
Insert the ACS SE 4.1.1.24 Upgrade CD into the CD-ROM drive on the distribution server (the server
Step 4
from which you are performing the upgrade).
Download the ACS Management Upgrade package:
Step 5
a. Open the upgrade CD.
Go to the /Upgrade Appliance management ACS 4.1 folder.
b.
Double-click the autorun.bat icon.
c.
The download utility starts. You are prompted to enter the hostname or IP address of the appliance,
as shown in
Figure 5-1
Enter the hostname or the IP address of the distribution server and click Install.
d.
The web interface starts.
e. Log in to the web interface.
f. Choose System Configuration > Appliance Upgrade Status.
The Appliance Upgrade page opens, as shown in
OL-19455-01
When you create a GUI administrator account, you will have two administrator accounts for the
ACS SE: a GUI account and a CLI account.
If you do not have a GUI administrator account; then, after the upgrade is complete, you will
not be able to log in to the ACS SE from the web interface.
Figure 5-1.
Appliance Prompt
Figure 5-2.
Installation Guide for the Cisco 1120 Secure Access Control Server 4.2
Upgrade Procedure
5-7