Cisco 1120 Installation Manual page 103

Chapter 5 Upgrading and Migrating to Cisco 1120 Secure Access Control Server
Table 5-1 Upgrade Use Cases
Upgrade Path
Full Upgrade from version
4.0 to 4.2
To perform a full upgrade with data restore from:
1. ACS SE 4.0 to ACS SE 4.1.1.24
Install the CSCsh32888 patch before taking a back up of the ACS SE 4.0 configuration.
a.
Back up your ACS SE 4.0 configuration.
b.
Use the ACS 4.2 Overall Upgrade CD.
c.
From the CD, use the ACS SE 4.1.1.24 upgrade.
d.
ACS SE 4.1.1.24 is installed.
For instructions on upgrading to ACS 4.1.1.24, see the latest version of the Release Notes
for Cisco Secure Access Control Server Solution Engine 4.1.1.24 at:
http://www.cisco.com/en/US/docs/net_mgmt/
cisco_secure_access_control_server_for_windows/4.1.2/
release/notes/acs412.html
ACS SE 4.1.1.24 to ACS 4.2
2.
Back up your 4.1.1.24 configuration.
a.
Use the ACS 4.2 Recovery DVD to re-image the CSACS 1120 with the 4.2 version.
b.
ACS 4.2 is installed.
Restore the 4.1.1.24 configuration.
c.
For instructions on upgrading to ACS 4.2, see the latest version of the Release Notes for
Cisco Secure Access Control Server Solution Engine 4.2 at:
http://www.cisco.com/en/US/docs/net_mgmt/
cisco_secure_access_control_server_for_windows/4.2/
release/notes/ACS42_RN.html
If you use ACS Remote Agents, after any type of upgrade to ACS 4.2, you must uninstall your old
Note
version of ACS Remote Agents, and install Remote Agents for ACS 4.2.
OL-19455-01
Installation Guide for the Cisco 1120 Secure Access Control Server 4.2
Upgrade Paths
Results
ACS SE 4.1.1.24 is
installed.
ACS 4.2 is installed.
ACS SE 4.1.1.24
configuration is upgraded
to ACS 4.2 configuration.
5-5