Chapter 3
Installing and Configuring the Cisco 1120 Secure Access Control Server 4.2
Next Steps
Next Steps
After you have successfully performed the procedures in this guide, CSACS 1120 is installed and
initially configured. The next step is to log in using the GUI administrator account and use a browser
and the web interface to fully configure the CSACS 1120 to provide the AAA services that you want
from this installation. The HTML address is in the following format: http://<ip address>:2002, where ip
address is the address that you assign during configuration.
For information on setting up user, group, network, and other parameters, see the User Guide for Cisco
Secure ACS 4.2.
The CSACS 1120 automatically creates an entry called Self in the AAA Servers Table. This entry
Note
identifies the CSACS 1120 machine. However, in the Proxy Distribution Table and the AAA Server
Table for RDMS synchronization, the CSACS 1120 creates an entry for the hostname of the device that
is running the CSACS 1120.
Installation Guide for the Cisco 1120 Secure Access Control Server 4.2
3-23
OL-19455-01