Verifying The Initial Configuration - Cisco 1120 Installation Manual

Chapter 3 Installing and Configuring the Cisco 1120 Secure Access Control Server 4.2
Step 18 To set the time and date of the CSACS 1120, at the
, and press Enter.
Y
Result: The console displays a numbered list of time zones.
At the
Step 19
the appropriate time zone for your geography and, press Enter.
Result: The console displays the new time zone.
Step 20 At the
•
•
Tip
Result: The console displays a confirmation message reflecting your choice
Step 21 At the
Step 22 At the
Result: The console displays:
Initial configuration is successful . Appliance will now reboot.
The system reboots.

Verifying the Initial Configuration

To verify that you have correctly completed the CSACS 1120 initial configuration:
Before You Begin
Establish a serial console connection to the CSACS 1120. For details, see
Reboot the CSACS 1120. For more information, see
Step 1
Result: When the system boots, a
At the
Step 2
At the
Step 3
At the
Step 4
Result: The console displays the status information.
Step 5 Verify that the information on the screen is correct.
OL-19455-01
Enter desired time zone index (0 for more choices):
Synchronize with NTP server? [N]:
To set the time manually, enter
To use an NTP server for setting time, enter
server that you want.
Only if you choose to use an NTP server, can you subsequently use the ntpsync command.
Enter date [mm/dd/yyyy]:
Enter time [hh:mm:ss]:
prompt, enter the new administrator name, and press Enter.
login:
prompt, enter the password you created during initial configuration, and press Enter.
password:
prompt, enter
system show
Change Date & Time Setting [N]:
prompt, do one of the following:
, and press Enter.
N
, and when prompted, enter the IP address of the NTP
Y
prompt, enter the date in the given format, and press Enter.
prompt, enter the current time in the given format, and press Enter.
Rebooting the CSACS 1120 from a Serial
prompt appears on the console.
login
and press Enter.
Installation Guide for the Cisco 1120 Secure Access Control Server 4.2
Initial Configuration
prompt, enter
prompt, enter the index number of
.
Configuring CSACS 1120.
Console.
3-21