Cisco 1120 Installation Manual page 52

Mounting the CSACS 1120 Series Appliance in a 4-Post Rack
Figure 3-3
Step 2 Noting the holes that you located in
Step 3 Hold the slide rail in the desired rack-mounting position. At the rear of the slide rail, press the multi-pin
adapter mounting pins together (see location 1 in
(see location 2 in
Figure 3-4
The following table describes the callouts in
1 Appliance mounting kit lock
Installation Guide for the Cisco 1120 Secure Access Control Server 4.2
3-6
Chapter 3 Installing and Configuring the Cisco 1120 Secure Access Control Server 4.2
Mounting Position Marks on a Rack
1 RU 1 RU
1 RU 1 RU
Step 1, align the left slide rail with its mounting holes.
Figure 3-4).
Inserting the Adapter Pins into the Mounting Holes
Figure 3-4) and insert the slide rail into the rack post
1
2
2
1
Figure 3-4.
2 Rack holes
OL-19455-01