Cisco 1120 Installation Manual page 21

Chapter 1 Cisco 1120 Secure Access Control Server Overview
Specifications for the CSACS 1120 Series Appliance
The CSACS 1120 Series appliance (see
appliance weighs from 15 lb (9.071 kg) to 33 lb (14.96 kg) depending on what options are installed in
the appliance. It measures 1.69 inches high x 17 inches wide x 20 inches deep (4.29 cm x 43.18 cm x
50.80 cm). These dimensions do not include the rack handles.
Figure 1-2
The CSACS 1120 Series appliance is configured for AC-input power and has a single auto-ranging
AC-input power supply, mounted in a standard 19-inch (48.3 cm), 4-post equipment rack (using the
rack-mount brackets provided). The CSACS 1120 features include:
•
•
•
•
•
•
•
•
•
•
•
•
•
OL-19455-01
Cisco 1120 Secure Access Control System Front View
Microprocessor—Intel Core 2 Duo 2.13-GHz processor with an 800-MHz front side bus (FSB) and
2 MB of Layer 2 cache.
Four synchronous dynamic RAM (SDRAM) slots that support up to 4 GB.
Support for up to 2 x 250-GB SATA hard drives.
Two fixed RJ-45 10BASE-T/100BASE-TX/1000BASE-T network interface connectors (located on
the rear panel).
One slimline DVD-ROM drive (located on the front-panel).
One DB-9 serial (console) port (located on the rear-panel).
Front-to-rear airflow blowers using two 40-mm exhaust fans and ducting for the CPU and memory,
two 40-mm exhaust fans built into the power supply, and one PCI exhaust fan.
Expansion slot support—One PCI-X (located on the rear panel).
Three USB 2.0 ports (two located on the rear panel, one on the front-panel).
One PS/2 keyboard port (located on the rear panel).
One PS/2 video monitor port (located on the rear panel).
One DB-15 serial (video) port (located on the rear panel).
Rear-access cabling.
Figure 1-2) is contained in a standard shelf-rack enclosure. The
Installation Guide for the Cisco 1120 Secure Access Control Server 4.2
Product Overview
CSACS1120
1-3