Grey Headline (continued)
CPL reference
Call screening of authenticated users
In this example, only calls from users with authenticated source addresses are allowed.
See the
Device authentication
section for details on how to enable authentication.
<?xml version="1.0" encoding="UTF-8" ?>
<cpl xmlns="urn:ietf:params:xml:ns:cpl"
xmlns:taa="http://www.tandberg.net/cpl-extensions"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="urn:ietf:params:xml:ns:cpl cpl.xsd">
<taa:routed>
<address-switch field="origin">
<not-present>
<!-- Reject call with a status code of 403 (Forbidden) -->
<reject status="403" reason="Denied by policy"/>
</not-present>
</address-switch>
</taa:routed>
</cpl>
Overview and
System
Introduction
status
configuration
D14049.08
November 2010
CPL examples
Cisco VCS
Zones and
Clustering and
configuration
neighbors
peers
Call screening based on alias
In this example, user ceo will only accept calls from users vpsales, vpmarketing or vpengineering.
<?xml version="1.0" encoding="UTF-8" ?>
<cpl xmlns="urn:ietf:params:xml:ns:cpl"
xmlns:taa="http://www.tandberg.net/cpl-extensions"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="urn:ietf:params:xml:ns:cpl cpl.xsd">
<taa:routed>
<address-switch field="destination">
<address is="ceo">
<address-switch field="origin">
<address regex="vpsales|vpmarketing|vpengineering">
<!-- Allow the call -->
<proxy/>
</address>
<not-present>
<!-- Unauthenticated user -->
<!-- Reject call with a status code of 403 (Forbidden) -->
<reject status="403" reason="Denied by policy"/>
</not-present>
<otherwise>
<!-- Reject call with a status code of 403 (Forbidden) -->
<reject status="403" reason="Denied by policy"/>
</otherwise>
</address-switch>
</address>
</address-switch>
</taa:routed>
</cpl>
Call
Bandwidth
processing
control
185
CISCO TELEPRESENCE
VIDEO COMMUNICATION SERVER
Firewall
Applications
Maintenance
traversal
ADMINISTRATOR GUIDE
Appendices