Setting The System Timeout - Cisco 1120 Installation Manual

Chapter 4 Administering the Cisco 1120 Secure Access Control Server
Time Zone: (GMT -xx:xx) XXX Time
Date and Time: mm/dd/yyyy hh/mm/ss
NTP Servers: ("Ntp Synchronization Disabled" - or - List of NTP servers)
Change Date & Time Setting? [N]
At the
Step 3
Enter.
Result: The console display the indexed time zones:
[xx] (GMT -xx:xx) XXX Time.
Enter desired time zone index (0 for more choices) [x]:
At the
Step 4
zone index number from the time zone setting list, and press Enter.
Tip
Result: The console displays the time zone setting.
At the
Step 5
At the
Step 6
want to use, and press Enter.
Tip
Result: The console displays:
Successfully synchronized with NTP server
Current Date/Time Setting:

Setting the System Timeout

You can set a system timeout which, is the number of minutes that can pass with no activity on the serial
console before the console login times out.
To set the CSACS 1120 system timeout:
Log in to the CSACS 1120. For more information, see
Step 1
Console.
At the system prompt, enter
Step 2
Step 3 At the
space, and press Enter.
Result: The system sets the new timeout period.
OL-19455-01
Change Date & Time Setting? [N]:
Enter desired time zone index (0 for more choices) [x]:
You can also enter 0 (zero) and press Enter to see more time zone index numbers; or simply
press Enter to accept the existing time zone.
Synchronize with NTP Server?
Enter NTP Server IP Address(es):
If you want to configure multiple NTP servers, at the Enter NTP Server IP Address prompt,
enter multiple IP addresses, each separated by a space.
Time Zone: XXX
Date & Time:
NTP servers:
set timeout
Enter timeout <minutes>:
prompt, to set the time zone, time, or date enter
prompt, enter , and press Enter.
Y
prompt, enter the IP address of the NTP server that you
Logging In to the CSACS 1120 from a Serial
, and press Enter.
prompt, enter the timeout period in minutes followed by a single
Installation Guide for the Cisco 1120 Secure Access Control Server 4.2
Reconfiguring CSACS 1120 System Parameters
prompt, enter the desired time
, and press
Y
4-23