Sample Board Controller Activation Command Sequence - Cisco UCS B420 M3 Upgrade Manual

Cisco UCS Blade Server
Use the GUI or CLI procedures in the

Sample Board Controller Activation Command Sequence

The following is an example of the commands with sample values.
Box-A# scope server 1/4
Box-A /chassis/server # scope boardcontroller
Box-A /chassis/server/boardcontroller # show image
Name
--------------------------------------------- -------------------- -------
ucs-b420-m3-brdprog.3.0.gbin
ucs-b420-m3-brdprog.8.0.gbin
Box-A /chassis/server/boardcontroller # activate firmware 8.0 force
Warning: When committed this command will reset the end-point
Box-A /chassis/server/boardcontroller* # commit-buffer
Note The server automatically reboots after the
Box-A /chassis/server/boardcontroller # show version
BoardController:
Box-A /chassis/server/boardcontroller # show version
BoardController:
When the
Note
incomplete. When the command returns
takes a few minutes.
Cisco UCS B420 M3 Server Upgrade Guide for Intel E5-4600 v2 Series CPUs
8
Running-Vers: 8.0
Package-Vers:
Activate-Status: Activating
Running-Vers: 8.0
Package-Vers:
Activate-Status: Ready
command returns
show version
UCS Manager Install and Upgrade Guides.
Type
Board Controller
Board Controller 8.0
command is executed.
commit-buffer
Activate-Status: Activating
Activate-Status: Ready
Version
3.0
, the process is working, but
, the process is complete. The process
OL-28629-01