Circontrol Raption 150 Compact CCS Service Manual page 84

Raption 150 Compact Service Manual
8
The unit needs regular maintenance and part inspection during its life.
Before starting with the maintenance or with the spare parts replacement
procedure, it is very important to disconnect the Charging station from any power
source.
Pay attention if you see the following symbols to prevent electrical hazards.
When performing some inspection and servicing at the equipment, except if
is absolutely necessary, make sure to switch OFF all circuit breakers before
starting to work.
The charger contains electric, mechanical and consumable components that must
be periodically checked, in order to keep the correct operation of the Charging
Station and keep it in the best conditions throughout its useful lifetime.
This section informs how to perform the preventive maintenance, the frecuency it
should be done and the components to verify inside the Charging Station.
To perform the first inspection of the Raption and the preventive maintenance,
please see the "Wear check list DC chargers"
77