CCL-CP1E/B ELECTRIC VEHICLE CHARGING SYSTEM IN MODE3 SYSTEM INSTALLATION AND USER MANUAL V1.0...
Page 2
CCL-CP1E/B MODE 3 CP1E/B MODE 3 This document is copyrighted, 2010 ment is copyrighted, 2010 - 2012 by Circontrol, S.A. All rights are Circontrol, S.A. All rights are reserved. Circontrol, S.A. reserves the right to make improvements to the reserved. Circontrol, S.A. reserves the right to make improvements to the reserved.
2 SYSTEM DESCRIPTION SYSTEM DESCRIPTION The CCL-CP1E/B MOD3 charge units provide to electric vehicles a charge units provide to electric vehicles a plug base base according to EN 61851-1. Comparing with a simple plug plug CCL-CP1E/B MOD3 offers the following: Safe collection of energy for the installation’s operator.
CP1E/B MOD3 unit. In case the unit is modified, the warranty unit. In case the unit is modified, the warranty will be void and CIRCONTROL shall not be liable for any future malfunction. will be void and CIRCONTROL shall not be liable for any future malfunction.
4.2 Anchoring and dimensions dimensions The CCL-CP1E/B MOD3 is designed to be anchored to the wall and is expected to 4 points for is designed to be anchored to the wall and is expected to 4 points for is designed to be anchored to the wall and is expected to 4 points for attachment.
Once retrieved the credit the card is ready for a new charge cycle. Once retrieved the credit the card is ready for a new charge cycle. CIRCONTROL, S.A. CIRCONTROL, S.A. – Innovació, 3 – 08232 – Viladecavalls (Barcelona) Viladecavalls (Barcelona) Tel.: +34 937 362 940 Tel.: +34 937 362 940 –...
Description The vehicles charge system The vehicles charge system CCL-CP1E/B MOD3 is an electrical and mechanical set able is an electrical and mechanical set able to offer charge service safely both indoors and public places and hold a continuous use...
6.2 Disassembly To get access inside the To get access inside the CCL-CP1E/B charger is necessary to open the back charger is necessary to open the back lid, depending on model, with Allen screws. depending on model, with Allen screws.
MODE3 card. We recommend having 1 unit per We recommend having 1 unit per 10 CCL-CP1E/B. o Plug bases. We recommend having 2 units per Plug bases. We recommend having 2 units per 10 CCL-CP1E/B CP1E/B. o RBC. Check the sensibility of the RBC.
Need help?
Do you have a question about the CCL-CP1E and is the answer not in the manual?
Questions and answers