Editing Operation Area - Panasonic AJ-LT95 Operating Instructions Manual

Parts and their functions

Editing operation area

1 VTR1 selector button
Press this button to perform VTR1 editing-related
settings or operations.
Check that its LED has lighted before proceeding
with the VTR1 editing-related
operations.
2 VTR2 selector button
Press this button to perform VTR2 editing-related
settings or operations.
Check that its LED has lighted before proceeding
with the VTR2 editing-related
operations.
<Note>
The VTR1 and VTR2 simultaneous operation mode
is established by pressing ([SHIFT] + [VTR1]) or
([SHIFT] + [VTR2]) together, and both LEDs 1 and
2 light.
To release the simultaneous operation mode, press
the VTR1 or VTR2 button.
In the simultaneous operation mode, it is not
possible for editing settings and menu settings to
be performed at the same time.
3 REC button
To set the unit to the recording mode manually,
press this button together with the PLAY button.
Recording on VTR1 is possible only when the
OPERATION MODE switch has been set to
SEPARATE.
When the button is pressed while the REC INHIBIT
switch is at OFF, the E-E mode will be established
for the video/audio channel 1 to channel 4 signals
for as long as the button is held down.
1
POWER
AUDIO MONITOR SELECT
OFF ON
MIX 4 MIX 4
3 3
CH 1 CH 2 CH 3 CH 4 (V1·2)
UNI 2 2 V1
V1/V2 MIX 1 MIX 1
ANALOG L R
REC
VAR
settings
settings
2 4 5 6 3
V2
7
CH 3 4
4 PLAY (STOP) button
PLAY: Press this button to set the VTR to the
playback mode.
STOP ([SHIFT] + [PLAY]):
or To set the VTR to the STOP mode, press the
PLAY button while holding down the SHIFT
button.
5 STILL (STBY OFF) button
STILL: Press this button to set the unit to the still-
picture mode.
or STBY OFF ([SHIFT] + [STILL]):
To release the standby mode while the still-
picture or stop mode is established, press the
STILL button while holding down the SHIFT
button.
6 REW button
Press this button to rewind the tape.
7 FF button
Press this button to fast forward the tape.
<Note>
Tape travel stops when the REW and FF buttons
are pressed at the same time.
17
CH 1 CH 2 CH 3 CH 4
V2
PB
UNI
SDI
REC
VAR
MIX 4 MIX 4 MIX 4 MIX 4
3 3 3 3
2 2 2 2
MIX 1 MIX 1 MIX 1 MIX 1
V2
INPUT
ANALOG ANALOG ANALOG ANALOG
SDI SDI SDI SDI
INT INT INT INT
10 10 10
0 0 0
10 10 10
20 20 20
30 30 30
0 0 0 0 0 0
CH 1 CH 2 CH 3 CH 4
V2 INT REC
/ V1 PB