Edit Menu - Panasonic AJ-LT95 Operating Instructions Manual

Setup menus

EDIT menu

Item
Superimposed
No.
display
303 STD/NON-STD
304 SERVO REF
305 EDIT RPLCE1
306 EDIT RPLCE2
307 EDIT RPLCE3
308 EDIT RPLCE4
The underlining indicates the factory setting.
Setting
Superimposed
No.
display
This selects the STD or NON-STD to match the composite input
signals.
0000 AUTO 0: The standard/non-standard signals are automatically identified
and processed.
0001 STD 1: The standard signals are processed. (Forced STD)
0002 N-STD 2: The non-standard signals are processed. (Forced NON-STD)
<Note>
This operation is not performed in the 625i mode.
This selects the servo synchronizing signals.
0000 AUTO 0: During recording or editing, the servo is synchronized with the
input signals; during playback, it is synchronized with the REF
signal.
0001 EXT 1: The servo is synchronized with the REF signal at all times.
This selects the allocation of the channels using the controller's
analog audio editing commands when a controller without
functions for digital audio editing is used to edit the digital audio
signals of the VTR.
The VTR's channel 1 editing commands can be set ON or OFF in
accordance with the analog audio signals specified by the
controller.
0000 N-DEF 0: No setting
0001 CH1 1: Setting accords with the analog channel 1 editing commands.
0002 CH2 2: Setting accords with the analog channel 2 editing commands.
0003 CH1+2 3: Setting accords with the analog channel 1 or channel 2 editing
commands.
<Note>
This operation is not performed in the 625i mode.
As with setup menu item No.305, this selects the VTR's channel 2
editing commands ON or OFF in accordance with the analog
audio signals specified by the controller.
0000 N-DEF 0: No setting
0001 CH1 1: Setting accords with the analog channel 1 editing commands.
0002 CH2 2: Setting accords with the analog channel 2 editing commands.
0003 CH1+2 3: Setting accords with the analog channel 1 or channel 2 editing
commands.
<Note>
This operation is not performed in the 625i mode.
As with setup menu item No.305, this selects the VTR's channel 3
editing commands ON or OFF in accordance with the analog
audio signals specified by the controller.
0000 N-DEF 0: No setting
0001 CH1 1: Setting accords with the analog channel 1 editing commands.
0002 CH2 2: Setting accords with the analog channel 2 editing commands.
0003 CH1+2 3: Setting accords with the analog channel 1 or channel 2 editing
commands.
<Note>
This operation is not performed in the 625i mode.
As with setup menu item No.305, this selects the VTR's channel 4
editing commands ON or OFF in accordance with the analog
audio signals specified by the controller.
0000 N-DEF 0: No setting
0001 CH1 1: Setting accords with the analog channel 1 editing commands.
0002 CH2 2: Setting accords with the analog channel 2 editing commands.
0003 CH1+2 3: Setting accords with the analog channel 1 or channel 2 editing
commands.
<Note>
This operation is not performed in the 625i mode.
36
Description of setting
V V
T T
R R
1 2
[ [
[ [
[
[
[
[