Panasonic AJ-LT95 Operating Instructions Manual page 90

Specifications
[VIDEO]
$ Analog component IN/analog
component OUT
(same for VTR1, VTR2)
Video band (DVCPRO 50):
O 525i
Y: 30 Hz to 5 MHz (±1 dB)
P /P : 30 Hz to 2.5 MHz (±1 dB)
B R
2.75 MHz (–3 dB)
Signal-to-noise ratio:
Better than 54 dB
K factor:
Less than 2%
$ Analog composite IN/analog composite
OUT
(same for VTR1, VTR2)
Video band:
O 525i
Y: 30 Hz to 4.5 MHz (±1.5 dB)
Differential gain:
Less than 5%
Differential phase:
Less than 3.5 deg
Y/C delay:
Less than 20 ns
K factor:
Less than 2%
[AUDIO]
$ Digital audio
(same for VTR1, VTR2)
Sampling frequency:
48 kHz
Quantizing:
16 bits
Frequency response:
20 Hz to 20 kHz ±1 dB (at reference level)
Dynamic range:
More than 85 dB (1 kHz, emphasis off, "A"
weighted)
Distortion:
Under 0.1% (1 kHz, emphasis off, reference
level)
Crosstalk:
Less than –80 dB (1 kHz, between 2 channels)
Wow & flutter:
Below measurable limits
Headroom:
525i: 20 dB
625i: 18 dB
Emphasis:
T1 = 50 µs/T2 = 15 µs (on/off selectable)
[ADJUSTMENTS]
$ Video output signals
VTR2)
Video gain:
More than ±3 dB
Chroma gain:
More than ±3 dB
Hue:
More than ±30 deg
Setup:
±10 IRE
H phase:
More than ±8 µs
SC phase:
±180 deg
90
(separately for VTR1,