Sending (Dump) And Loading (Load) Edit Data To An External Component - Panasonic AJ-LT95 Operating Instructions Manual

Sending and loading
(DUMP)
Concerning the EDL format
Either the AG-A850 format or CMX340 format can be selected as the data format when edit data is to be sent to
a personal computer or other external component.
Select the format using the setup menu item No.271 (EDL FORMAT).
$ AG-A850 format
Since all the edit data in the EDL memory is sent in this format, the edit data can be completely restored when
data which was sent from the unit is loaded again into the unit. However, if data which was prepared with ON
selected as the setup menu item No.374 (EDL AUTO CLR) setting is to be loaded, it must be received at the
same ON setting.
Since the nature of the EDL format makes it impossible to differentiate between audio split data and video split
data in split edited data, the AUDIO SPLIT setting is what is normally used for such data.
[Output example]
Editing mode
ASMBL: assemble editing; VA12, VA1234: insert editing
Reel number
0001 (0001 is the unit's only option)
Event number
D: deleted event
<Notes>
O The following restrictions apply when data edited by the AG-A850 is input to the unit.
Event number:
Reel number:
Effect type:
Slow-motion editing: Only events with 0a (STILL) speed data are received with slow-motion editing.
O The following restrictions apply when data edited by the unit is input to the AG-A850.
Editing mode:
(LOAD)
Player IN point
Effect type
C: Cut (cut is the unit's only option)
Event numbers are ignored, and up to 200 events are received in sequence from the
first event.
All reel numbers are received as "0001."
Only cut-edited events are received.
TC inserts are ignored.
edit data to an external component
OUT point Recorder IN point
83
OUT point