Panasonic AJ-LT95 Operating Instructions Manual page 39

Setup menus
EDIT menu
Item
Superimposed
No.
display
379 1ST-E TITLE
380 1ST-E DISP
381 ENTRY CORR
382 SKIP (r) MARK
The underlining indicates the factory setting.
Setting
Superimposed
No.
display
This selects the title screen characters (3 lines a20 characters)
which is to be superimposed onto the black burst signal during
1ST EDIT.
Characters:
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9
, . : ; ? ! /
<Notes>
O This item takes effect when ON has been selected as the setup
menu item No.380 (1ST E-DISP) setting.
O This operation is not performed in the 625i mode.
This sets whether the title screen is to be superimposed onto the
black burst signal and recorded during 1ST EDIT.
0000 OFF 0: The title screen is not superimposed.
0001 ON 1: The title screen is superimposed.
<Note>
The screen cannot be superimposed in the 625i mode.
This selects whether to provide compensation for the OUT point
registration when previewing open-ended editing.
0000 OFF 0: No compensation is provided.
0001 ON 1: Compensation is provided (–12 frames).
This selects the processing of already edited events when multi-
event editing is to be performed.
0000 OFF 0: Already edited events are re-edited during multi-event editing.
0001 ON 1: Multi-event editing is performed with the already edited events
skipped.
39
Description of setting
' ( ) + – ± ¢ =
V V
T T
R R
1 2
[
[
[
[