Modifying And Clearing Edit Data - Panasonic AJ-LT95 Operating Instructions Manual

Modifying and clearing edit data

When an edit point has been set incorrectly, follow the
method below to modify or clear the edit data.
$ Modifying edit points (IN point, OUT
point or duration) one frame at a time
(trimming)
O To increase the edit IN point by one frame, press
the + button while holding down the IN button.
O To decrease the edit IN point by one frame,
press the – button while holding down the IN
button.
O To increase the edit OUT point by one frame,
press the + button while holding down the OUT
button.
O To decrease the edit OUT point by one frame,
press the – button while holding down the OUT
button.
O To increase the duration by one frame, press the
+ button while holding down the DUR button.
O To decrease the duration by one frame, press
the – button while holding down the DUR button.
$ Modifying edit points (IN point, OUT
point or duration)
To modify an edit IN point by one more than one
frame:
1 Press the IN button.
2 To shift the edit point further back, press the +
button; to shift it further ahead, press the –
button.
3 Use the numeric input buttons to input the value
by which the edit point is to be incremented or
decremented.
4 Press the ENTER button.
To modify an edit OUT point, press the OUT button
instead of the IN button in step 1.
To modify a duration, press the DUR button instead
of the IN button in step 1.
DUR
OUT
IN
POWER
AUDIO MONITOR SELECT
OFF ON
MIX 4 MIX 4
3 3
CH 1 CH 2 CH 3 CH 4 (V1·2)
UNI 2 2 V1 V2
V1/V2
MIX 1 MIX 1
L R
ANALOG
REC
VAR
C ENTER +, –
CH 1
UNI
CH 3 4
VAR
MIX 4
3 3
2 2
MIX 1
ANALOG
SDI
INT
CH 1
$ Clearing edit points (IN point, OUT point
or duration)
To clear an edit IN point:
1 Press the IN button.
2 Press the C button.
3 Press the ENTER button.
To clear an edit OUT point, press the OUT button
instead of the IN button in step 1.
To clear a duration, press the DUR button instead
of the IN button in step 1.
70
CH 2 CH 3 CH 4
V2
PB
SDI
REC
MIX 4 MIX 4 MIX 4
3 3
2 2
MIX 1 MIX 1 MIX 1
V2
INPUT
ANALOG ANALOG ANALOG
SDI SDI SDI
INT INT INT
10 10 10
0 0 0
10 10 10
20 20 20
30 30 30
0 0 0 0 0 0
CH 2 CH 3 CH 4
V2 INT REC
/ V1 PB