Panel Switch Area - Panasonic AJ-LT95 Operating Instructions Manual

Parts and their functions
CONTROL PREROLL SYNCHRO
REMOTE 7
LOCAL 5
3
EXT VTR
1 2

Panel switch area

1 CONTROL switch
REMOTE: For controlling the unit from the REMOTE
connector (9P).
LOCAL: For controlling the unit using the controls
on its front panel.
EXT VTR: For controlling an external VTR using the
controls on the unit's front panel. The
VTR connected to the 9P connector of
VTR1 can be controlled using the control
system of VTR1.
<Note>
This switch is forcibly set to the LOCAL position in
the 625i mode.
2 PREROLL switch
Used to set the preroll time to 3, 5 or 7 seconds.
When the phase synchronization does not serve
the purpose or editing has failed or for other
reasons, the preroll time is automatically set to the
next longest setting. (If 7 seconds is set, this will
remain set as the preroll time.)
3 SYNCHRO switch
Used to set the phase synchronization and/or color
framing.
CF: Phase synchronization and color framing are
performed.
ON: Phase synchronization is performed but color
framing is not performed.
OFF: Phase synchronization is not performed.
4 TAPE/EE switch
Used to select the signals which are output in the
stop, fast forward or rewind mode.
TAPE: The signals played back from the tape are
output.
EE: The input-switched input signals are output.
VTR 1
MODE TC REC INHIBIT
REGEN
CF
TAPE ON
R-RUN
ON
EE F-RUN OFF
OFF
3 4 5 6
VTR 2
MODE TC REC INHIBIT
IN
REGEN
2
CH
TAPE ON
R-RUN
4
CH
EE F-RUN OFF
4 5 6
5 TC switch
REGEN: The built-in time code generator is
synchronized to the time code selected by
the setup menu item No.570 (REGEN SEL)
setting.
R-RUN: The time code advances only during
recording. (Presettable)
F-RUN: The time code advances regardless of the
operation mode while the power remains
on. (Presettable)
6 REC INHIBIT switch
Used to select whether signals are to be recorded
on the cassette tape.
ON: Recording on the cassette tape is inhibited. At
this time, the REC INH lamp in the display
tube lights.
OFF: Recording on the tape is possible provided
that the accidental
mechanism on the cassette tape is at the
recording enable position.
12
OPERATION
ANALOG V2
MODE
VIDEO IN
AUDIO EDIT
OUT
SDI
INT
2
V1-V2
CH
V1
EXT
4
CH
V2
SEPARATE ANALOG
erasure prevention