Operation Flow - Panasonic WJ-GXD400 Setup Instructions

Operation Flow

The operation flow of this unit is as follows.
z
x
c
v
Network settings of the PC
b
n
6
Rack Mounting
Connections
Startup
Setup
Start operation
Install the unit in the rack.
Refer to the Installation Guide for further information
about rack mounting.
If this unit is not installed in the rack, go to the step 2.
Connect this unit to a PC and cameras.
Refer to the provided Installation Guide for further infor-
mation about connections.
Turn on the power of the unit.
For further information, refer to the Installation Guide.
Change the TCP/IP setting of the PC to conform to the
settings of this unit. (page 12)
Perform the required settings on the setup menu to
start operation. (page 14)
Operation can be started.
Images from the configured cameras are displayed.