Panasonic AJ-LT95 Operating Instructions Manual page 87

Error Messages
Superimposed
Display tube
display
DRUM ROTA TOO
E — 59
SLOW
DRUM ROTA TOO
E — 59
FAST
CAP ROTA TOO
E — 61
SLOW
E — 64 S REEL TOO FAST
E — 67 T REEL TOO FAST
T REEL TORQUE
E — 69
ERR
S REEL TORQUE
E — 70
ERR
CAP TENSION
E — 71
ERROR
REEL TENSION
E — 72
ERROR
REEL DIR
E — 73
UNMATCH
E — 81 SOL NG
E — 82 C SOL NG
E — BA BATTERY
Description
This appears when the cylinder motor's rotation speed is
abnormally low.
This appears when the cylinder motor's rotation speed is
abnormally high.
This appears when the capstan motor's rotation speed is
abnormally low.
This appears when the supply reel motor's rotation speed is
abnormally high.
This appears when the take-up reel motor's rotation speed is
abnormally high.
This appears when an abnormal torque applied to the take-up
reel motor has been detected.
This appears when an abnormal torque applied to the supply
reel motor has been detected.
This appears when an abnormal supply tape tension has been
detected in the capstan mode.
This appears when an abnormal supply tape tension has been
detected in the reel mode.
This appears when the take-up reel motor has rotated in the
reverse direction.
This appears when a problem has been detected in the
solenoid drive circuit. After this error message appears, the
power is forcibly turned off.
This appears when a problem has been detected in the
cleaning solenoid drive circuit. After this error message
appears, the power is forcibly turned off.
This appears when the input DC voltage drops below the
undercut voltage (approx. 10.6V).
After this error message appears, the power is forcibly turned
off.
87
VTR operation
Auto OFF
Auto OFF
Auto OFF
Auto OFF
Auto OFF
Auto OFF
Auto OFF
Auto OFF
Auto OFF
Auto OFF
Power OFF
Power OFF
Power OFF