Smartgen HGM8140D User Manual page 25

No. Items
Signal
Charge Alternator
27
Failure
Battery
28
Voltage
Battery
29
Voltage
Current
30
Transformer
31 Full Load Rating
Over
32
Percentage
33 Over Current Delay
34 Fuel Pump On
35 Fuel Pump Off
36 Relay Output 1
37 Relay Output 2
38 Relay Output 3
39 Relay Output 4
40 Relay Output 5
41 Digital Input 1
Digital Input
42
Delay
HGM8140 Military Genset Controller
HGM8140 MILITARY GENSET CONTROLLER USER MANUAL
Parameters
(0-30)V
Over
(12-40)V
Under
(4-30)V
(5-6000)/5
(5-6000)A
Current
(50-130)%
(0-3600)s
(0-100)%
(0-100)%
(0-99)
(0-99)
(0-99)
(0-99)
(0-99)
(0-26)
1
(0-20.0)s
Defaults
shutdown the generator.
During generator is normal running, when
alternator D+(WL) voltage has fallen below
6.0
the set value and remains for 5s, It will
initiate a shutdown alarm signal.
When battery voltage has exceeds the set
value and remains for 20s, It will initiate a
33.0
warning alarm signal. Only warning and not
to shutdown the generator.
When battery voltage has fallen below the
set value and remains for 20s, It will initiate
8.0
a warning alarm signal. Only warning and
not to shutdown the generator.
500 The ratio of external CT
Generator‟s rated current, used for load
500
over current calculating.
When the load current has exceeded the set
120
value, "over current" delay is initiated.
Definite time-lag delay value. When load
current has exceeded the set value and the
"over current" delay has expired, over
1296
current alarm is initiated. When the set
value is 0, only warning and not to shutdown
the generator.
When fuel level has fallen below the set
value for 10s, "Fuel Pump On" alarm is
25
initiated.
When fuel level has exceeded the set value
80
for 10s, "Fuel Pump Off" alarm is initiated.
Factory default: Energized To Stop, details
2
to see Table 11.
Factory default: Idle Speed Control, details
3
to see Table 11.
Factory default: Close Generator, details to
5
see Table 11.
Factory default: Reserved, details to see
6
Table 11.
Factory default: Not Used, details to see
00
Table 11.
Factory default: High Temperature Alarm
1
Input, details to see Table 12.
2.0
Version 1.2 2019-09-12
Description
Page 25 of 56