Table of Contents
Advertisement
13.5 CUMMINS GCS-MODBUS
It is suitable for GCS engine control module. RS485-MODBUS used to read information of engine.
Engine types are QSX15, QST30, QSK23 / 45/60/78 and so on.
Terminals of controller
Relay Output 1
Start relay output
Terminals of controller
RS485 GND
RS485+
RS485-
Engine Type：Cummins QSK-MODBUS，Cummins QST-MODBUS，Cummins QSX-MODBUS.
13.6 CUMMINS QSM11
Terminals of controller
Relay Output 1
Start relay output
CAN_SCR
CAN(H)
CAN(L)
Engine Type：common J1939.
HGM8140 Military Genset Controller
HGM8140 MILITARY GENSET CONTROLLER USER MANUAL
Table 24 D-SUB Connector 06
D-SUB connector 06
5&8
-
Table 25 D-SUB Connector 06
D-SUB connector 06
20
21
18
Table 26 Engine OEM Connector
OEM connector of engine
38
-
-
46
37
Programmable output 1 set as "Fuel Output" and
outside expand relay, when fuel output, making
port 05 and 08 of the connector 06 be connected.
Connect to starter coil directly.
CAN communication shielding line(connect with
ECU terminal only).
Using impedance 120Ω connecting line.
Using impedance 120Ω connecting line.
Programmable relay output 1 set as "Fuel Output"
Connect with starter coil directly
CAN communication shielding line (connect with
controller‟s this terminal only).
Using impedance 120Ω connecting line.
Using impedance 120Ω connecting line.
Version 1.2
2019-09-12
Remark
Remark
Remark
Page 48 of 56
Advertisement
Table of Contents
