Smartgen HGM8140D User Manual page 36

No. Type
16 Remote Control Mode
Charge Alt
17
Warning
18 Reserved
19 Alarm Mute
20 Idle Control Mode
21 60Hz Select
22 Rise Speed Pulse
23 Drop Speed Pulse
24 Forced Manual Start
25 Inhibit Alarm Stop
26 Reserved
27 Instrument Mode
RS232 Display Control
28
Enable
CAN-1 Display Control
29
Enable
CAN-2 Display Control
30
Enable
CAN-3 Display Control
31
Enable
HGM8140 Military Genset Controller
HGM8140 MILITARY GENSET CONTROLLER USER MANUAL
will automatically start or stop according to the remote start input.
When input is active, all keys except for
panel of HGM8140 are inactive and remote control mode will
display on the LCD.
Failure
Connected to charge alt failure output port.
When input is active, "Audible Alarm" output can be inhibited.
Idle control output when input is active.
Used for genset with CANBUS interface. When it is active,
frequency is 60Hz.
It is used for GTSC1 electronic fuel injection engine, when it is
active, engine speed will increase 50rpm.
It is used for GTSC1 electronic fuel injection engine, when it is
active, engine speed will decrease 50rpm.
When it is active, genset will be forced started, details please to see
Emergency Start.
All shutdown alarms are prohibited except for the emergency
shutdown.
All outputs are prohibited in this mode.
When it is active, hose control function can be realized by the
displayed HGM8140D module on RS232 port.
When it is active, hose control function can be realized by the
displayed HGM8140D module on CAN-1 port.
When it is active, hose control function can be realized by the
displayed HGM8140D module on CAN-2 port.
When it is active, hose control function can be realized by the
displayed HGM8140D module on CAN-3 port.
Version 1.2
Description
2019-09-12
on the
Page 36 of 56