Block Diagram - Pilz PMCtendo DD5 Operating Manual

6 Wiring
6.2

Block diagram

6- ][Verdr_Blockschalt_DD5 Block diagram 6200 Block diagram 6.2
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
6-2
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: pilz.gmbh@pilz.de
The following block diagram provides an overview of the wiring of the
servo amplifier. The wiring of the expansion cards is not shown.
The block diagram also shows the position and type of shield connec-
tions, the PE and the connections of the attached device to the mount-
ing plate.
*) Please note: If you are using an external brake resistor, remove the link
between Pin 4 and 5 on X8.
Sym- Connec- Description
bol tion
X1, X2, X6, Shield in the connector housing
X9
X3, X8 Shield on the front plate
PE Protective earth, PE
Mounting Wide area, electrical connection between the designat-
plate ed device and the mounting plate in the control cabinet