Power Element; Mains Voltage - Pilz PMCtendo DD5 Operating Manual

6 Wiring
6.6

Power element

][Funktion_Zwischenkreis_DD5_Wichtig
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: pilz.gmbh@pilz.de
Multi-axis systems
With multi-axis systems please note the specific conditions of your
plant. On multi-axissystems, servo amplifiers can beinterconnected via
the intermediate circuit.
As with single-axis systems, max. cable runs can only be achieved if the
material requirements are strictly observed.
NOTICE
High transient currents between connected intermediate circuits
can destroy the servo amplifier.
- Supply the servo amplifier from the same mains (identical

mains voltage).

- Do not wire servo amplifiers with smaller outputs between two
servo amplifiers with higher outputs.
- Ensure that the total rated currents of all the servo amplifiers
connected in parallel in an intermediate circuit is not exceeded.
230 V series: Max. 24 A

480 V series: Max. 40 A

6-21