Under "Connection Cables", Please Note The Requirements For The:  Cable Cross Sections  Insulation Material - Pilz PMCtendo DD5 Operating Manual

6 Wiring
6.7 Control element
6.7.1 Supply voltage 24 VDC
6- Control element 6700 Control element 6.7
Supply voltage 24 VDC 6- ][Verdr_Leiterquerschnitte_Verweis
Verdr_Versorgung_Warnung
][Verdr_Versorgung_24_V_DD5
Connector X4
][Verdr_Versorgung_24_V_protego_Sicherung_DD5
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
6-22
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: pilz.gmbh@pilz.de
Under "Connection cables", please note the requirements for the:
Cable cross sections

Insulation material

WARNING!
Electric shock!
Safe electrical isolation must be ensured for the external power
supply that generates the supply voltage. Failure to do so could
result in electric shock. The power supplies must comply with
EN 60950-1, 05/2006, EN 61558-2-6, 11/1997.
Connector pin assignment
Pin Designation
1 +24 V
2 +24 V
3 DGND
4 DGND
Connection
Use the following fuses.
Fuse
Device type
Blow-out fuse or similar
Description
Supply voltage + 24 VDC
Supply voltage + 24 VDC
Earth for supply voltage
Earth for supply voltage
Connected internally:
Pin 1 and 2 (24 V)
Pin 3 and 4 (DGND)
24 V connection isolated from exter-
nal power supply, e.g. with isolating
transformer
Noise suppression filters integrated
within the servo amplifier
All
Max. 8 AF
Type
Fine wire fuse or
circuit breaker