Equipment Condition Types - Alcatel-Lucent 1850 User Provisioning Manual

Appendix
............................................................................................................................................................................................................................................................

Equipment Condition Types

Description
The following table shows the equipment condition types used in the system. The Access
Identifier column identifies the type of equipment associated with each condition type.
The factory default service affecting (SA) and non-service affecting (NSA) notification
code setting for each condition type is shown in the Notification Code columns (a dash
indicates that setting does not apply for that condition type).
Condition
Type
ABNORM
AL
AIRTEMP
BPERROR
CONTBUS
CONTCOM CR
DBF
............................................................................................................................................................................................................................................................
8DG08763KAAA
Issue 1 February 2009
Service
Notification
Code Effect
MN NSA
MJ NSA
MJ SA
MJ SA
NA NSA
SA
MN NSA
Condition
Effect Description
SC Indicates that a module
has been inserted in a
position where it cannot
be provisioned, or the
module has been
deleted but is still
physically present
SC The cooling air
temperature has
exceeded the first
(lower) threshold,
associated with air
temperature sensor at
the FANs intake.
SC Backplane Error
indicates that a failure
has been detected on a
shelf backplane.
SC Indicates that the shelf
controller is
unreachable
SC
SC Indicates that a
communication failure
has been detected
between the active and
passive FLC cards.
SC Database Backup
Failure, creation of
local backup database
failed.
Equipment Condition Types
Access
Identifier
MDL
FAN320
Shelf
MT320
Shelf
Shelf
6 - 1 7