Alcatel-Lucent 1850 User Provisioning Manual page 550

Appendix
............................................................................................................................................................................................................................................................
Command
INIT-REG-
SDHFACILITY
INIT-SYS-NEW
INIT-SYS-OLD
INIT-SYS
INIT-TMPLSPM-
PWSEG
............................................................................................................................................................................................................................................................
6 - 15 6
Description
Monitored parameter type,
identifies the parameter whose
PM data register is being
initialized.
Monitor Value, specifies the value
to be set in the register specified
by LOCN and TMPER.
Location specifies the PM
registers location to be initialized.
Direction, specifies the direction
of the signal being monitored
(receive or transmit)
Time Period, specifies whether the
15-minute or 1-day (24 hour) PM
collection register is to be
initialized.
Starts the background activity on
the NE to perform the actual
switch over from the current
release to the new release
Starts the background activity on
the NE to switch back from the
current release and database to
previous release and database
Phase, identifies the type of
restart.
Command Mode, identifies the
Command Execution Mode.
The INIT-TMPLSPM-PWSEG
command initializes (reset register
to zero value) the current 15-
Minute or current 1-Day
(specified by TMPER parameter)
PM collection register (counters)
for the near-end
side pertaining to the specified
PseudoWire Segment.
Parameter defaults
Parameter Default
MONTYPE ALL
MONVAL 0
LOCN NEND
DIRN RCV
TMPER 15-MIN
- -
- -
PHASE Entry required.
MODE NORM
TID Entry Required
Issue 1 February 2009
8DG08763KAAA