Alcatel-Lucent 1850 User Provisioning Manual page 36

Craft terminal overview
............................................................................................................................................................................................................................................................
The TL1 (Translation Language level 1) consists of input commands (TID, AID, CTAG,
General Delayed Activation, Positional, Keyword Parameter Block, State Parameter
Blocks), command output response (successful and unsuccessful) messages,
acknowledgement output messages, and autonomous output messages.
It uses a Telnet session with TCP/IP connectivity between the host from which the Telnet
session is opened, and the Alcatel-Lucent 1850 TSS.
The CLI (Command Line Interface) performs most of the CT functionalities.
CLI is not required to manage the following functions:
Support Domain
•
– Event Reporting
– PM Filtering
– MIB Backup/Restore and SW download
C&R domain:
•
– Tunnel management:
Additionally, CLI does not cover the following management functions:
Support Domain:
•
– Condition of Configuration Mode
– Inhibit/Allow Logging
Personal computer characteristics
Personal Computer Interface
The PC permits to transfer information between the Operator and the Network Element
(NE). For this purpose it uses the following interfaces:
............................................................................................................................................................................................................................................................
1 - 6
Overview
8DG08763KAAA
Issue 1 February 2009