Menu bar
............................................................................................................................................................................................................................................................
– OGPORT
– VCn = (where n = 4, 44c, 416c, 464c)
– TUSEG
– 10GBE = 10 Gigabit Ethernet alarms
– VCG = Virtual Concatenation Group alarms
– ODU2 = ODU2 port alarms
User Label - The entry box shows a mnemonic string to address the ASAP. The
•
xxxxxxx-0 and -1 are factory defined, while xxxxxx-2 to -n can be set by the user.
Each single alarm can be classified with a criterion selected by the operator.
The Search hyperlink allows to start the search procedure.
The Create allows to configure a new ASAP. See
(p. 5-54).
ALM cutoff
Select Alarms -> ALM CUTOFF option as shown in
Figure 3-59 Alarm cutoff
Click on SEND functional button a command cuts off the office audible alarm indications
without changing the local alarm reporting and the following indication appears under the
table.
The currently active audible alarm indications will be silenced. The visual alarm
indications are not affected. Future alarm reporting is not be affected and new audible
alarm indications will be provided for any new alarms.
............................................................................................................................................................................................................................................................
3 - 64
"Create TDM ASAP management"
Figure
3-59.
Alarms menu
8DG08763KAAA
Issue 1 February 2009