Alcatel-Lucent 1850 User Provisioning Manual page 566

Appendix
............................................................................................................................................................................................................................................................
Command
RTRV-OSADDRS
RTRV-OSIAREA
RTRV-OVHCCRS
RTRV-PATHSL
RTRV-PATHTRC
RTRV-PHB-PROF
RTRV-PM-GBE10
............................................................................................................................................................................................................................................................
6 - 17 2
Description
Retrieves on the node the
addresses of the management
systems.
Retrieves the parameters of a
configured OSIAREA.
Retrieves the crossconnections
between channels defined by
overhead bytes of the STM-n
frame.
Retrieves the contents of the
Signal Label.
Retrieves the contents of the Path
Trace using the 16-byte frame
format.
Retrieve one or all Per Hop
Behavior Profile stored in the
System.
Monitored parameter type,
identifies the type of monitored
parameter whose PM data
registers are being retrieved.
Monitor level, specifies the
discrimination level of PM
parameter values to be reported
for the specified monitored
parameter (MONTYPE). The
format of MONLEV is <LEVEL>
-<DIRECTION>.
Location specifies whether PM
registers for near-end PM
monitoring are to be reported.
Direction, specifies the direction
of the signal being monitored
(receive or transmit)
Parameter defaults
Parameter Default
- -
- -
TID Entry Required
TID Entry Required
TID Entry Required
TID Entry Required
MONTYPE ALL
MONLEV 1-UP
LOCN NEND
DIRN RCV
Issue 1 February 2009
8DG08763KAAA