Alcatel-Lucent 1850 User Provisioning Manual page 355

Procedures
............................................................................................................................................................................................................................................................
Parameter
Computed Hop List
Restored Hop List
Total Up Time
Primary Up Time
Instance Up Time
Path Changes
Last Path Changes
Creation Time
State Changes
Routing Info Group
Next Hop IP Address
Next Hop Unnumbered
Pseudowires
Tunnel Segment
Access Identifier
Type
MPLS Port
............................................................................................................................................................................................................................................................
8DG08763KAAA
Issue 1 February 2009
Description
Specifies the Computed hoplist index of Tunnel
instance path to destination
Specifies the Hoplist index of Tunnel instance
path to destination used for connection
restoration after restarts. It is in the range [0-
4294967295]
Specifies the total Tunnel up time aggregated for
all connection instances. Unit is second. It is in
the range [0-4294967295]
Specifies the primary Tunnel instance up time.
Unit is in second. It is in the [0-4294967295]
Specifies the Tunnel instance in question up
time. Unit is second. It is in the range [0-
4294967295]
Specifies the Tunnel instance path changes
number. It is the range [0-4294967295]
Specifies the time since last Tunnel instance path
changes. It is in the range {0-4294967295}.
Specifies the time stamp when first Tunnel
instance came to IS state. Unit is in second. It is
in the range {0-4294967295}.
Specifies the Tunnel instance state changes
number. It is in the range {0-429496795}
Description
Specifies the list of Node IP Address of the next
hop in routing path to destination.
Specifies the list of Unnumbered interface on the
node of the next hop in routing path to
destination
Specifies the list of AID of all the pseudowires
belonging to the tunnel to be retrieved
Description
Specifies the AID of Tunnel Segment.
Specifies the type of Tunnel Segment. It is
Termination or SWA
Specifies the AID of the provisioned port that is
a server of the MPLS Tunnel Segment
Modify tunnel
5 - 9 1