Alcatel-Lucent 1850 User Provisioning Manual page 548

Appendix
............................................................................................................................................................................................................................................................
Command
ENT-VCG
INH-SWTOPROTN
INH-USER-SECU
INIT-REG-GBE10
............................................................................................................................................................................................................................................................
6 - 15 4
Description
Maximum Number of Members.
The number of members of the
type given in VCGTYPE to be
assigned as the initial number of
members to the VCG being
provisioned. Indicates the
Maximum number of members in
the VCG that are available for
carrying traffic
The type of VCG. Defines if the
VCG contains VT1.5.
Propagation of server failures.
Indicates if server failures of both
directions are propagated to the
VCG.
The Alarm Severity Assignment
profile (ASAP) name to use with
this facility
Primary State, specifies the
primary state to which the VCG is
set.
-
User Identifier, specifies a unique
user ID.
Monitored parameter type,
identifies the parameter whose
PM data register is being
initialized.
Monitor Value, specifies the value
to be set in the register specified
by LOCN and TMPER.
Location specifies the PM
registers location to be initialized.
Direction, specifies the direction
of the
signal being monitored (receive or
transmit)
Time Period, specifies whether the
15-minute or 1-day (24 hour) PM
collection register is to be
initialized.
Parameter defaults
Parameter Default
MAXMBR Entry Required
VCGTYPE Entry Required
BIDISERVP N
ROP
ALMPROF <currently
designated default
profile>
PST IS
- -
UID Entry Required
MONTYPE ALL
MONVAL 0
LOCN NEND
DIRN RCV
TMPER 15-MIN
Issue 1 February 2009
8DG08763KAAA