Menu bar
............................................................................................................................................................................................................................................................
Figure 3-71 Synchronization - Operate
The Synchronization Switch tab displays the Modify Synchronization Switch tab that
contains the following parameters:
Switch Command - Specifies the switch command, that is requested by the user. The
•
values are LOCKOUT, FRCD, MAN, and INT
Shelf Access Identifier - This is used to change the content of Switch To Reference
•
parameter according to the selected shelf access identifier
Switch To Reference - Specifies the access identifier of the synchronization facility
•
The Operate link send the "OPR-SYNCNSW" TL1 command to the agent and the results
are displayed in the same page
Release
The Release option displays the following as shown in
Figure 3-72 Synchronization switch
The Synchronization Switch tab displays the Modify Synchronization Switch panel
that displays the following parameters:
Switch Command - Specifies the switch command, that is requested by the user. The
•
values are CLOCKSWITCH, REFSWITCH
Shelf Access Identifier - This is used to change the content of Access Identifier
•
parameter according to the selected shelf access identifier
Access Identifier - Specifies the access identifier of the synchronization facility
•
The Release link sends the "RLS-SYNCNSW" TL1 command to the agent
............................................................................................................................................................................................................................................................
8DG08763KAAA
Issue 1 February 2009
Synchronization menu
Figure
3-72.
3 - 7 7