Ne Ip Tunnel Parameters - Alcatel-Lucent 1850 User Provisioning Manual

Procedures
............................................................................................................................................................................................................................................................
Figure 5-45 IP tunnel creation
........................................................................................................................................................................................................................
4
Table 5-26
CREATION panel parameters:
Table 5-26 NE IP tunnel parameters
Parameter
AID
REMOTE NSAP
Encapsulation Type
........................................................................................................................................................................................................................
5
Click Save to store all the settings and return to the previous page.
........................................................................................................................................................................................................................
6
Click Cancel to revoke all the settings and return to the previous page.
E O
N D
........................................................................................................................................................
............................................................................................................................................................................................................................................................
5 - 58

"NE IP tunnel parameters"

S
F T E P S
provides the description of NE IP TUNNEL
Description
(IP Tunnel Identifier), it is the identifier of the specific IP tunnel
to create. Allowable values are in the 1 - 128 range
(TL1 SID of the IP Tunnel target NE.) The Target NE must be
reachable via OSI over DCC and the NSAP address
corresponding to this TID must be able to be retrievable from the
TARP cache. The values are: <1-20 VALID TID
CHARACTERS> or "<1-20 VALID TID CHARACTERS>".
If the value contains non-alphanumeric characters, it has to be
enclosed in double quotes
Specifies the encapsulation type for the NE
Create IP tunnel
8DG08763KAAA
Issue 1 February 2009