Alcatel-Lucent 1850 User Provisioning Manual page 233

Tree area
............................................................................................................................................................................................................................................................
– ON - Autoprovisioning Allowed in that slot position
– OFF - Autoprovisioning Not-Allowed in that slot position
Region - The default value is ETSI
•
Command Mode - To change the status of the unit. The choices are:
•
– NORM (normal)
– FRCD (forced)
Alarm Profile - Specifies the Alarm Severity Assignment profile (ASAP) name to use
•
with this equipment entity. <userlabel> 1-40 alphanumeric characters (plus '-')
assigned as the userlabel for the desired profile. Click Select hyperlink to select a
different profile.The Save link allows to store all the changes.
The Restore link allows to revert back to the previous changes.
The Delete allows the user to delete the modified settings.
The create EQPS link allows to configure a new EQPS.
The Alarms panel contains the View link to displays the VCG alarms.
The VCG resources available selection panel contains Access Identifier parameter and
the View link that displays the total, available, and maximum number of VCGs configured
on this port.
The VCG Range panel contains the Minimum and Maximum VCG index range
parameters. The valid range is 1-124.
The Search link filters the VCG based on the minimum and maximum index range
selected.
Access a resource - STMn and AUn signals
Select STMn port from the tree area, the client area displays the functional tabs and
parameters associated with the port as shown in
............................................................................................................................................................................................................................................................
8DG08763KAAA
Issue 1 February 2009
Figure 4-25.
Access a module
4 - 3 5