Pseudowire Management - Alcatel-Lucent 1850 User Provisioning Manual

Menu bar
............................................................................................................................................................................................................................................................
– ALL
– SHELF 1-1
Tunnel Type - This specifies the type of Tunnel to be filtered. The values are:
•
– LOCAL - No filter applied
– CP - All the tunnel related to the Management Plane
– ALL - All the tunnel related to the Control Plane
– LOST - All the tunnel related to LOST
Tunnel ID Filter - Enable the check box to enter the tunnel id to be filtered in the text
•
field.
Tunnel AID Filter - Enable the check box to enter the tunnel access identifier to be
•
entered in the entry field.
The Create Head/Tail Tunnel is to create a new Tunnel. See
(p. 5-84).
The Create Transit Tunnel is to create a new Transit Tunnel. See
(p. 5-99).

Pseudowire management

The PseudoWire Management window displays the following as shown in
Figure 3-17 Pseudowire management
The Pseudowire Management tab displays the Filter by panel that provides the following
parameter:
Pseudowire Resource - Select the Pseudowire Resource from the combo-box. The
•
values are:
– ALL
– SHELF-1-1
PW ID Filter - Enable the check box to enter the pseudowire id to be filtered in the
•
text field.
............................................................................................................................................................................................................................................................
3 - 28
(T)-MPLS menu
"Create head/tail tunnel"
"Create transit tunnel"
Figure 3-17.
8DG08763KAAA
Issue 1 February 2009