Alcatel-Lucent 1850 User Provisioning Manual page 213

Tree area
............................................................................................................................................................................................................................................................
– Actual Layer 2 control frames (0x) - Refers about the enabling or disabling the
– Policing mode - Refers about the policing on the incoming ETS traffic. Possible
– Color profile - Refers about the name of the association between the incoming S-
– VLAN pop - If enabled it pops out the "Stacked-VLAN" shim fields of the
– Classification mode
The panel contains the following hyperlinks:
Cancel - To cancel the settings and return to the previous page.
Save - To apply the previous settings and return to the previous page.
Deactivate - To change the State field only and return to the previous page.
Add a classifier - To open the relevant page, it allows to set a further classifier.
b. Classifier Criteria panel
– Classifier index - This is an incremental index assigned by the system to the
– State: This is the notification about the actual status of the resource; active (the
– Priority bits - Refers the prioritization of an Ethernet data flow on the 3 "user-
– VLAN - Refers the indexed value assigned by the system to this profile.
– Ether Type - Refers the stacked-VLAN identifier that will be pushed into the
The panel has the following hyperlinks:
Cancel - To cancel the existing settings and return to the previous page.
Deactivate - To change the State field only and return to the previous page.
Delete - To remove the classifier from the list.
............................................................................................................................................................................................................................................................
8DG08763KAAA
Issue 1 February 2009
Protocol Frames that accedes the port.
options: disabled (the policing is not performed) or color-blind (the policing is
based on the associated TD, without taking into account the "prioritization") or
color-aware (the policing is based on the associated TD and on the priority colors
of the associated "Color profile").
VLAN priorities and the forwarded frames coloring (for scheduling purposes,
inside the bridge). If a Color Profile is associated, the priority field of the relevant
associated Classifier is different from untagged or don't care; further the TD type
is regulated.
ethernet frame. SVLAN tags transport information used by an external provider
network. The options are: enabled or disabled. If this is enabled, the "priority"
field of the relevant Classifier must be different from untagged or don't care.
resource.
resource is in-service); not active (the resource is out-of-service).
priority" bits (802.1p) of the "Tagged-Ethernet" frame and also on the 3 "provider-
priority" bits of the "Stacked-Vlan" frame. the range is also shown in the From:
and To: fields.
ethernet frame.
LAG configuration
4 - 1 5