Menu bar
............................................................................................................................................................................................................................................................
Figure 3-19 EVPLAN service
The EVPLAN Service tab provides the following parameters:
XC Id - Specifies the cross-connection Id for the selected EVPL service
•
From - Specifies the source to establish EVPL service
•
From user label - Specifies the user label for the source
•
To - Specifies the target to establish EVPL service
•
To user label - Specifies the user label for the target
•
Topology - The combo-box allows to choose the XC type
•
Click Create to configure a new EVPLAN service. See
(p.
5-119).
............................................................................................................................................................................................................................................................
3 - 30
"Create EVPLAN service"
Issue 1 February 2009
(T)-MPLS menu
8DG08763KAAA