To access this page, click Tools > User Account.
Item
State
Retry Time
Block Time
Apply
The following figure displays the Wrong Password Information settings.
4.11.7
N-Key
To access this page, click Tools > N-Key.
The following table describes the items in the previous figure.
Item
Auto Mode
N-Key Status
Apply
To access this page, click Tools > N-Key.
The following figure displays the N-Key Information settings.
4.11.8
Reset System
To access this page, click Tools > Reset System.
Click Restore to have all configuration parameters reset to their factory default val-
ues. All changes that have been made will be lost, even if you have issued a save.
Click Select Excepted Configuration to keep the configuration you selected when
resetting.
Reset settings take effect after a system reboot.
4.11.9
Reboot Device
To access this page, click Tools > Reboot Device.
EKI-7720 Series User Manual
Description
Click to enable or disable the wrong password detection function.
Enter a variable to designate the wrong password entry threshold,
State option must be enabled.
Enter a variable to designate the lockout period in minutes after the
retry attempts threshold is reached.
Click Apply to create a new user account.
Figure 4.224 Tools > User Account
Figure 4.225 Tools > N-Key
Description
Click the option to set the auto mode for the N-Key status.
Click the drop-down menu to select N-Key status.
Click Apply to create a new user account.
Figure 4.226 Tools > N-Key Information
147