Figure 4.74 L2 Switching > Spanning Tree > Stp Global Settings; Figure 4.75 L2 Switching > Spanning Tree > Stp Information - Advantech EKI-7712 Series User Manual

To access this page, click L2 Switching > Spanning Tree > STP Global Settings.
Figure 4.74 L2 Switching > Spanning Tree > STP Global Settings
The following table describes the items in the previous figure.
Item
Enabled
BPDU Forward
BPDU Guard
PathCost Method
Force Version
Apply
The following figure displays the STP Information settings.
Figure 4.75 L2 Switching > Spanning Tree > STP Information
4.5.10.2 STP Port Settings
The STP Port Settings page allows you to configure the ports for the setting, port's
contribution, configure edge port, and set the status of the BPDU filter.
EKI-7720 Series User Manual
Description
Click the radio-button to enable or disable the STP status.
Select flooding or filtering to designate the type of BPDU packet.
Click the radio-button to enable or disable the BPDU guard. When
enabled, BPDU Guard can disable edge ports that receive BPDU
packets. This prevents a new device from entering the existing STP
topology. Thus devices that were originally not a part of STP are not
allowed to influence the STP topology
Select short or long to define the method of used for path cost calcula-
tions.
Click the drop-down menu to select the operating mode for STP.
STP-Compatible: 802.1D STP operation.

 RSTP-Operation: 802.1w operation.
 MSTP-Operation: 802.1s operation.
Click Apply to save the values and update the screen.
69