Table of Contents
Advertisement
The following table describes the items in the previous figure.
Item
Port
Queue
State
CIR (Kbps)
Apply
The ensuing table for FE1 Egress Per Queue Status settings are informational only:
Queue Id and Egress Rate Limit (Kbps).
4.8.4
Bandwidth Guarantee
4.8.4.1
Global Settings
To access this page, click QoS > Bandwidth Guarantee > Global Settings.
Figure 4.168 QoS > Bandwidth Guarantee > Global Settings
The following table describes the items in the previous figure.
Item
Status
Guarantee Band-
width
Type
UDP Source Port
Force Mode
Apply
To access this page, click QoS > Bandwidth Guarantee > Global Settings.
EKI-7720 Series User Manual
Description
Click the drop-down menu to select the port to define the Egress
queue.
Click the drop-down menu to set the queue order for the Egress set-
ting.
Click Disabled or Enabled to set the Egress queue state.
Enter the value in Kbps (16 to 1000000) to set the CIR rate for the
Egress queue.
Click Apply to save the values and update the screen.
Description
Click Disabled or Enabled to set the guarantee bandwidth.
Enter the value for the guarantee bandwidth.
Click UDP Source Port or RTP H.264 to set the guarantee bandwidth
type.
Enter the port number for the UDP source.
Click the check box to enable the force mode.
Click Apply to save the values and update the screen.
113
Advertisement
Table of Contents
