Logging Message; Figure 4.4 Monitoring > Logging Message - Advantech EKI-7712 Series User Manual

Item
System Contact
MAC Address
IP Address
Subnet Mask
Gateway
Loader Version
Loader Date
Firmware Version
Firmware Date
Build Version
System Object ID
System Up Time
4.3.2

Logging Message

The Logging Message Filter page allows you to enable the display of logging mes-
sage filter.
To access this page, click Monitoring > Logging Message.
The following table describes the items in the previous figure.
Item
Target
Severity
Category
EKI-7720 Series User Manual
Description
Click Default to enter the contact person: up to 128 alphanumeric
characters (default is Default).
Displays the MAC address of the switch.
Displays the assigned IP address of the switch.
Displays the assigned subnet mask of the switch.
Displays the assigned gateway of the switch.
Displays the current loader version of the switch.
Displays the current loader build date of the switch.
Displays the current firmware version of the switch.
Displays the current firmware build date of the switch.
Displays the current firmware build version of the switch.
Displays the base object ID of the switch.
Displays the time since the last switch reboot.
Figure 4.4 Monitoring > Logging Message
Description
Click the drop-down menu to select a target to store the log mes-
sages.
 Buffered: Store log messages in RAM. All log messages are
cleared after system reboot.
File: Store log messages in a file.

The setting allows you to designate a severity level for the Logging
Message Filter function.
Click the drop-down menu to select the severity level target setting.
The level options are:
 emerg: Indicates system is unusable. It is the highest level of
severity.
 alert: Indicates action must be taken immediately.
 crit: Indicates critical conditions.
error: Indicates error conditions.

 warning: Indicates warning conditions.
 notice: Indicates normal but significant conditions.
info: Indicates informational messages.

 debug: Indicates debug-level messages.
Click the drop-down menu to select the category level target setting.
35