Figure 4.213 Diagnostics > System Log > System Log Server - Advantech EKI-7712 Series User Manual

The following table describes the items in the previous figure.
Item
Target
Severity
Apply
The ensuing table for Local Logging Settings Status settings are informational
only: Status, Target, Severity and Delete (click to delete the desired target).
4.10.4.3 System Log Server
The System Log Server page allows you to configure the log server.
To access this page, click Diagnostics > System Log > System Log Server.
Figure 4.213 Diagnostics > System Log > System Log Server
The following table describes the items in the previous figure.
Item
Server Address
Server Port
Description
Enter the local logging target.
Click the drop-down menu to select the severity level for local log
messages.
The level options are:
 emerg: Indicates system is unusable. It is the highest level of
severity
 alert: Indicates action must be taken immediately
crit: Indicates critical conditions

 error: Indicates error conditions
 warning: Indicates warning conditions
notice: Indicates normal but significant conditions

 info: Indicates informational messages
 debug: Indicates debug-level messages
Click Apply to save the values and update the screen.
Description
Enter the IP address of the log server.
Enter the Udp port number of the log server.
140 EKI-7720 Series User Manual