Figure 4.37 L2 Switching > Link Aggregation > Load Balance Information; Figure 4.38 L2 Switching > Link Aggregation > Lag Management - Advantech EKI-7712 Series User Manual

The following table describes the items in the previous figure.
Item
Load Balance Algo-
rithm
Apply
The following figure displays the Load Balance Information settings.
Figure 4.37 L2 Switching > Link Aggregation > Load Balance Information
4.5.3.2 LAG Management
Link aggregation is also known as trunking. It is a feature available on the Ethernet
gateway and is used with Layer 2 Bridging. Link aggregation allows for the logical
merging of multiple ports into a single link.
To access this page, click L2 Switching > Link Aggregation > LAG Management.
Figure 4.38 L2 Switching > Link Aggregation > LAG Management
The following table describes the items in the previous figure.
Item
LAG
Name
Type
Ports
Apply
Description
Select the radio button to select the Load Balance Setting: MAC
Address, IP/MAC Address or Source Port.
Click Apply to save the values and update the screen.
Description
Click the drop-down menu to select the designated trunk group:
Trunk 1 ~8.
Enter an entry to specify the LAG name.
Click the radio button to specify the type mode: Static or LACP.
Click the drop-down menu to select designated ports: FE1-8 or
GE1-2.
Click Apply to save the values and update the screen.
52 EKI-7720 Series User Manual