Figure 4.186 Management > Power Over Ethernet > Poe System Settings; Figure 4.187 Management > Power Over Ethernet > Poe Port Settings - Advantech EKI-7712 Series User Manual

To access this page, click Management > Power Over Ethernet > PoE System
Settings.
Figure 4.186 Management > Power Over Ethernet > PoE System Settings
The following table describes the items in the previous figure.
Item
Maximum Power
Available
OverLoad Discon-
nect Mode
Apply
The ensuing table for PoE System Information settings are informational only: Firm-
ware Version, Maximum Power Available, Actual Power Consumption and Overload
Disconnect Type.
4.9.3.2 PoE Port Settings
The PoE Port Settings page allows you to configure the port status, its power limita-
tions, legacy mode status, and power limit settings.
To access this page, click Management > Power Over Ethernet > PoE Port Set-
tings.
Figure 4.187 Management > Power Over Ethernet > PoE Port Settings
The following table describes the items in the previous figure.
Item
Port
Enabled
EKI-7720 Series User Manual
Description
Select the value in Watts to set the maximum available power.
Click the drop-down menu to designate the overload mode:
 Overload Port First:
 Port-Based Priority:
Click Apply to save the values and update the screen.
Description
Click the drop-down menu to select a PoE port.
Select Enabled or Disabled to designate the PoE port function by
ports.
123